• 07795 564841

  • 02080872833

  • Mon - Sun 24hr
    Available (24hr/7d)


How to repair a shower diverter valve

by Bravo plumbers

Posted on November 05, 2020 at 05:45 PM


Turning on your shower ought to be as simple as the flip of a switch. Yet, when your shower diverter breaks, cleaning up isn't so natural—water keeps on pouring from your tub's faucet after you've exchanged the diverter. To repair a shower diverter valve is fortunately brisk and genuinely straightforward.
In case you have a home guarantee and you imagine that your shower diverter valve has crashed, validate to contact your home guarantee organization to get Plumbers in North-London to analyze the issue for you for just a little help call charge. That way, if the diverter valve has cracked from ordinary damage, you can get a fix or trade for that charge. In case you don't have a home guarantee, look through to figure out how to repair the shower diverter valve yourself.

Shower Diverter Valve

There are two kinds of shower diverter valves. One empowers your tub to serve as a shower, wiping out the requirement for a different shower stand. The second kind of shower diverter valve is found close to the showerhead. It empowers you to utilize the standard overhead shower, just as a hand-held shower head for soaping and washing.

How to repair a shower diverter valve

Whenever you've verified that your shower diverter is broken, don't hold up in fixing it. Despite the fact that it may be a simple undertaking to put off, a wrecked shower diverter results in wastage of water and makes a defective shower insight. To repair a shower diverter valve is a home improvement venture that you can finish in only one day.
Proceed with these steps:-

  1. Turn off the water source of the shower.
  2. Close your drain with tape so that little screws or other significant parts are not lost down the drainpipe.
  3. Fix the screws behind the faceplate of the diverter valve. If you endeavor this fix still the water keeps on pouring or break gradually from the bath nozzle after the shower diverter has been locked in, proceed onward to the subsequent stage.
  4. Dismantle the shower diverter. If your diverter has a swivel valve, unscrew the nut at the stem of the diverter and eliminate the whole valve. In case it has an entryway valve, unscrew the linked tub nozzle.
  5. Supplant the diverter. To be certain you buy the right substitution, carry your old diverter with you to the store.
  6. Introduce the new diverter, ensuring that the parts don't cross-string one another. Utilize a wrench to fix the diverter, being mindful not to over tighten it. Screw-up the door or change the plug to guarantee that it is in the right position, contingent upon whether it is locked in.
  7. Turn on the supply of the water to the shower. In case your shower streams well and no water overflows from the tub nozzle, at that point your shower diverter valve substitution is effective.